Introduction
This guide shows you how to load your Choptones Tone Master Pro presets and Cabinet IRs onto your Fender Tone Master Pro. Importing presets and IRs is done with the Tone Master Pro Control desktop app (Mac or Windows) over USB-C. Note: the phone/tablet app cannot import your own presets or IRs, so use the desktop app for this.Loading Choptones Presets on the Tone Master Pro
1 - Install the Tone Master Pro Control app on your Mac or Windows computer (from Fender) and connect the Tone Master Pro with a USB-C data cable.
2 - Unzip the Choptones pack on your computer: you will find the preset files (.preset).
3 - Open Pro Control and select the My Presets section in the left navigation.
4 - Drag the unzipped .preset files onto the app to install them on your Tone Master Pro.
Loading Choptones IRs on the Tone Master Pro
1 - Keep the Tone Master Pro connected to the computer via USB-C, with Pro Control open.
2 - Go to the IR Manager section in Pro Control.
3 - Click the + button, browse to the folder with the Choptones IR files (.wav), select them and click Open.
4 - Your IRs are now on the device and can be selected inside a Cab/IR block in your presets.
Summarized loading procedure for Choptones packs
1 - Connect the Tone Master Pro to your computer via USB-C and open the desktop Pro Control app.
2 - Drag the .preset files into the "My Presets" section to install the presets.
3 - Add the .wav IR files via the IR Manager using the "+" button.